Home Products Machinery Events Gallery Contact Us

Address:

Cheriton House

Old Station Yard

Eardisley

Herefordshire

HR36NS

England

 Office: 01544327298

 Stewart: 07971187770

 Pawel: 07426806592

 Contact  numbers

Home Products Machinery Events Gallery Contact Us

TTP-600 premium

EQUIPMENT / TECHNICAL DATA:


Weight: 2450 kg
Main motor power: 11.0 kW (optionally 15 kW)
Power demand: 16.5 kW (full option)
Supply voltage: 380 V, 50 Hz
Vertical advance: electrical (motoreducer 0.55 kW)
Longitudinal advance of the saw head – stepless, inverter 0-40 lin.m./min (motoreducer 0.55 kW)
Advance of the tensioning roller: electric – motoreducer 0.12 kW
Guide wheels: 600/25mm
Stationary control panel
Water supply solenoid valve
Planking computer ISP-10
Saw head clearance – 340/950 mm (optionally 1150 mm)
Blade width: 35 – 40 mm
Blade length: recommended bimetallic 4800x40x1.27–1.40
Kerf thickness: 1.5 – 2.2 mm
Complete hydraulics: log clamp x 1, side supports, log loader x 1, levelling with log advance drive (forwards/backwards) x 1, turner x 1, levelling roller
Substructure of the sawing machine made of a closed section 200 mm x 120 mm x 6 mm.


OPTIONAL EQUIPMENT:


15kW motor

Pre-cut debarker
Extension to bed length
Board/log scraper + double-sided advance drive
Electrical sawdust collector
Additional hydraulic tooling

Wider head (1300mm log diameter)


OVERALL DIMENSIONS (basic model):


Length: - 6000 mm
Width: -2250 mm
Height: - 2700 mm


TECHNICAL DATA OF THE LOG TO BE WORKED (basic model)


Diameter of the log to be worked: 1000 mm (optionally 1300 mm)
Weight of the log to be worked: up to 3 tonnes
Standard cutting length: 4500 mm


OUTPUT:


Machine output depends on the thickness of the log to be sawn and the required thickness of sawn wood – on average 2 m3/h depending on the blade used.

Typical blade: 4800 x 35 x 1.1 – approx. 10 m3/8h
Bimetallic blade: 4800 x 40 x 1.27 – 1.40 – approx. 15/8h
Stellite-edge blade: 4800 x 40 x 1.1 – tooth pitch 25 mm – approx. 20 m3/h


This machine is designed for log wood, mainly in sawmills cutting logs in an amount of up to 20 m3/8 hours as well as companies requiring a very high accuracy and quality of the resulting raw material, e.g. oak, hornbeam, and beech, once sawn.
The hydraulic system mounted on a massive substructure made of a closed profile (200 mm x 120 mm x 6 mm) ensures a very high degree of operation stability to make the manoeuvring of large logs of up to 3 tonnes easier.
The wheels (filled type, diameter 600 mm) guiding the multi-groove belt of type PK (no thickened areas, resin and sawdust do not accumulate between the guidance and the belt) ensure the maximum operation life of the blade. In addition, they allow using a bimetallic blade with a width of up to 40 mm and a thickness of 1.27 mm or 1.40 mm. With such a blade in use, stable operation can be ensured. It considerably reduces wood waviness and allows obtaining precise sawing of up to 0.2 mm. The time between the intervals of blade sharpening is longer, compared with a typical blade (about an hour), and is about 3 hours if a bimetallic saw is used. It considerably improves the quality of cutting, particularly in the case of hard wood species. As the sawing machine TTP-600 Premium is provided with a stellite-edge blade (a special alloy based on cobalt and chromium), the sawing output is increased by 30 %, compared with typical blades (confirmed by many operation tests). Kerf is only 2.20 mm, and the tooth pitch is 25 mm, which allows applying much higher advance rates during the sawing process.